Compac Engineering

1964-2024
60
YEARS OF EXCELLENCE

Shop Online Categories

Sensors

Modes Of Operation For ERECTA SWITCH Sensors

ERECTA SWITCH sensors and sensor sets are clever sensor configurations that package reed switches and bimetallic temperature switches into useful chemical resistant liquid level sensors and sets, liquid flow sensors and sets, and liquid temperature sensors and sets.

Series 5 flow sensor mode of operation

Flow sensors can sense small flows in liquid or gas. Series 5 flow sensors are a family of flow sensors and flow indicators based on a common parts set and principle of operation. Pressure differential across a movable magnetic poppet inside the sensor operates a reed sensor switch and/or provides a visible flow indicator through a transparent window.

Although Series 5 sensors are designed for small flow sensor applications (under 3 GPM), they can be used in bypass lines so flow can be sampled by the sensor without impeding flow efficiency. As an “in the flow stream” sensor, 5’s are only limited by the I.D. of their internal port diameter.

Flow sensors are preset, at time of manufacture, to close contact upon increasing flow rate. Sensor set points range from 0.1 GPM to 1.00 GPM. Series 5 flow sensors and flow sensor sets are offered in your choice of Polypropylene, Acetal, and Kynar PVDF plastics. Except for the 3/8 NPT boss 5-21H flow sensor, connections to the flow medium are made through sensor accessory adapter fittings. Several pipe thread and hose sizes can be accommodated.

Series 10 level sensor mode of operation

The 10-782 ubiquitous liquid level sensor is the key sensing element for the ERECTA SWITCH Series 10 liquid level sensor product group. It can be use alone as a liquid level sensor or as the sensor component of a larger ERECTA SWITCH sensor or level sensor set. A magnetic float rising or falling in response to liquid level change actuates a hermetically sealed magnetic reed switch. This straight forward method of converting motion into an electrical signal is so uncomplicated, that many years of reliable service can be expected.

The sensor switch action of the 10-782 can be configured either a normally open or normally closed sensor switch action depending upon the orientation of the float on the stem.

Normally Closed – Float legend toward retaining ring. Level sensor switch opens as the float approaches the hex and closes as float approaches the retaining ring at the opposite end.

Normally Open – Float legend toward hex. Level sensor switch opens as float approaches the retaining ring and closes as the float approaches the hex at the opposite end.

15-650 side mounted liquid level sensor mode of operations

Our Series 15 side mounted level sensors and sets are loaded with features of sensors costing 100%-500% more.

15 side mounted level sensors are made up of two cleverly sculptured, injection molded sections. A housing section containing a sealed-in glass magnetic reed switch and a float section containing a permanent magnet. Sections are hinged together by an integral clevis mechanism. The float moves in response to changes in liquid level, thereby transporting the magnet into proximity of the switch. It is a simple concept. Move the float toward the sensor switch housing and the switch “clicks on”. Move the float away and the switch “clicks off”.

The sensors switch action of 15 sensors and sets can be configured for either normally open or normally closed sensor switch action, depending upon the orientation of the level sensor at the time of installation. An orientation arrow symbol is molded into the hex of the body. “Up Arrow denotes float is above the sensors centerline. Conversely, “down arrow” denotes float is below the sensor’s centerline.

Series 11-800 temperature sensor and set modes of operation

Series 11-800 temperature sensors are slow response sensor switches. 11-800s can sense temperatures from freezing to 90C in a variety of narrow differential, preset trip points. SPST contacts actuate when the element’s case reaches its preset temperature set point.

This is a bi-metallic sensor switch mechanism packaged in a plastic sheath incorporating a switch section, hex section and 1/8NPT thread for mounting purposes. It mates with a large variety of ERECTA SWITCH components so just about any mounting requirement can be satisfied. And temperature sensors can be combined with level sensors and flow sensors making possible many low cost, efficient solutions to otherwise complex control problems.

11-800 temperature sensors are creep mechanism (having no built in differential) and are characterized by slow make/slow break and rapid cycling capability. As a result they are suited for both control and limit sensor applications.

The switch is not a snap acting device. So potential for rapid cycling in certain situations must be taken into account. Similarly, the thermal lag caused by poor thermal conductivity of the switch’s plastic sheath limits the sensor to temperature changes which occur over several seconds/degree change. As is the case with all Compac products, final design criteria should be based on your testing of our products, in your application, at your facility.

Normally open and normally closed versions are available. Normally open is designated as type “CR” and closes its contacts on rising temperature.

Normally closed is designated as type “C”

A New Way to Buy OEM Sensor Products

© 2024 Compac Engineering, Inc. All rights reserved.