1-1/4" NPT receptacle-mount level switch set with slosh shield for agitated tank environments. Kynar PVDF construction handles aggressive acids, halogens, oxidizers, and ultra-high-purity process fluids.
| Quantity | Price |
|---|---|
| 1–29 | $206.58 |
| 30–49 | $190.60 |
| 50–99 | $167.61 |
| 100+ | $76.09 |
The 10-102-SS-KR is the full-specification switch set for aggressive chemical environments with active fluid agitation: Kynar PVDF wetted parts, slosh shield for turbulence-immune switching, and liquid-tight connector for sealed wiring entry — all in an outside-in assembly requiring no internal access to the vessel.
Target applications include semiconductor wet bench recirculating baths, agitated acid storage, and pharmaceutical process tanks where both chemical compatibility and signal stability under agitation are required.
Complete set: 10-782 switch, 10-700-CS connector, 10-700-SS slosh shield, 10-700-R1 receptacle, 10-700-WC-NY LT connector, all Kynar PVDF. Precision nipple (10-715) ordered separately.
Minimum CD: 3.0" (76.2 mm). NL = LL − 2.20" (55.9 mm).
| Specification | Value |
|---|---|
| Mount | 1-1/4″ NPT |
| Housing | 10-700-R1 Receptacle (with Slosh Shield) |
| Install | Outside → In (no internal access required) |
| Switch Levels | 1 |
| Switch Element | 10-782 magnetic reed switch |
| Contact Rating | 70 VA, 50W resistive | UL File E70063 |
| NL Formula | NL = LL − 2.20″ (55.9 mm) |
| CD (min) | 3.0″ (76.2 mm) |
| Nipple Range | 1–70 in, ordered separately (10-715) |
| Compliance | RoHS |
| Material | Kynar PVDF |
A float level switch like the 10-102-SS-KR is a point-level device: a float rides the liquid and actuates a magnetic reed switch at a set height, giving a simple on/off signal — no power, no firmware, no calibration. "Sensors" usually means continuous measurement (ultrasonic, radar, capacitive). ERECTA SWITCH targets reliable discrete-point control.
The 10-102-SS-KR is used for pump start/stop control, high-level overflow protection, low-level dry-run protection, and tank or reservoir level alarms in OEM equipment. The modular ERECTA SWITCH system is built into laundry, HVAC, water-treatment, hydraulic, and chemical-handling machinery.
Choose the material to match the media: Polypropylene (PP) for general aqueous, acids, and bases; Acetal (AC/Delrin) for solvents, fuels, and hydrocarbons; Kynar PVDF (KR) for aggressive or harsh chemicals. Every ERECTA SWITCH model is offered in all three materials.
The 10-102-SS-KR is point-level — it provides a discrete on/off signal at a set height. For multiple switch points, use a multi-level extended-stem set (2-, 3-, or 4-level) instead of a single continuous sensor.
ERECTA SWITCH offers vertical top-mount, bulkhead, and extended-stem configurations, plus side-mounted single-point models. The mount style is part of the model number — select the configuration that matches your tank geometry.
Point detection is repeatable and mechanical. The trip height on the 10-102-SS-KR is set by the 10-715 Precision Nipple, ordered separately in 1-inch increments (1″–70″), so you place the switch point exactly where the application needs it.
Our engineering team can verify compatibility with your application and chemistry before you order.