Series 10 · ERECTA SWITCH®
10-208 — Pop-In Two-Level Switch Set
Two-level pop-in switch set. O-ring locked receptacle through plastic lid, outside-in. Available in Polypropylene, Acetal, and Kynar PVDF. 1-Pack and 10-Pack.
Two-level pop-in switch set. O-ring locked receptacle through plastic lid, outside-in. Available in Polypropylene, Acetal, and Kynar PVDF. 1-Pack and 10-Pack.
The 10-208 is available in three wetted materials and two pack sizes. Polypropylene for water-based and mild chemical service. Acetal for solvents, fuels, and hydrocarbons. Kynar PVDF for aggressive acids, halogens, and ultra-high-purity applications.
Common specifications across all 10-208 material variants.
| Specification | Value |
|---|---|
| Mount | Pop-In (1-9/16″ / 39.67 mm hole, plastic lid) |
| Housing | 10-702-R1 Receptacle + 10-700-WC LT Connector |
| Install | Outside → In |
| Lid Thickness | 0.062–0.078″ (plastic, distortion capable) |
| Switch Levels | 2 |
| Switch Element | 10-782 magnetic reed switch |
| Contact Rating | 70 VA, 50W resistive | UL File E70063 |
| NL Formula | NL = LL − 2.62″ (66.59 mm) |
| BD (min) | 1.5″ (38.10 mm) |
| CD (min) | 1.5″ (38.10 mm) |
| Nipple Range | 1–70 in, ordered separately (10-715) |
| Compliance | RoHS |
A float level switch like the 10-208 is a point-level device: a float rides the liquid and actuates a magnetic reed switch at a set height, giving a simple on/off signal — no power, no firmware, no calibration. "Sensors" usually means continuous measurement (ultrasonic, radar, capacitive). ERECTA SWITCH targets reliable discrete-point control.
The 10-208 is used for pump start/stop control, high-level overflow protection, low-level dry-run protection, and tank or reservoir level alarms in OEM equipment. The modular ERECTA SWITCH system is built into laundry, HVAC, water-treatment, hydraulic, and chemical-handling machinery.
Choose the material to match the media: Polypropylene (PP) for general aqueous, acids, and bases; Acetal (AC/Delrin) for solvents, fuels, and hydrocarbons; Kynar PVDF (KR) for aggressive or harsh chemicals. Every ERECTA SWITCH model is offered in all three materials.
The 10-208 is point-level — it provides a discrete on/off signal at a set height. For multiple switch points, use a multi-level extended-stem set (2-, 3-, or 4-level) instead of a single continuous sensor.
ERECTA SWITCH offers vertical top-mount, bulkhead, and extended-stem configurations, plus side-mounted single-point models. The mount style is part of the model number — select the configuration that matches your tank geometry.
Point detection is repeatable and mechanical. The trip height on the 10-208 is set by the 10-715 Precision Nipple, ordered separately in 1-inch increments (1″–70″), so you place the switch point exactly where the application needs it.
Our engineering team can verify chemical compatibility and recommend the right mounting option for your application.